[Repost] Prefabricated Building Planning and Subsidy Policies of 31 Provinces and Cities Across China
WeChat Sync · Xiaowei · 2021-03-17
1. By 2020, prefabricated buildings shall account for more than 15% of newly built buildings nationwide, with key promotion regions reaching over 20%, active promotion regions over 15%, and encouraged promotion regions over 10%.
2. By 2020, cultivate more than 50 prefabricated building demonstration cities, over 200 prefabricated building industrial bases, and more than 500 prefabricated building demonstration projects, and build over 30 prefabricated building science and technology innovation bases, so as to fully leverage their demonstration, leading and driving roles.
Prefabricated buildings are an important carrier of the industrialization of the construction industry. To promote the industrialization of construction, the Chinese government has issued a series of policies in recent years, coordinating efforts along the upstream and downstream of the industry chain. To date, all 31 provinces nationwide have successively released prefabricated building development plans (among which 26 provinces have issued corresponding subsidy policies).
It is estimated that by 2020, about 8 provinces will see prefabricated building floor area account for 30% of the newly started floor area in the period, about 5 provinces will reach 20%, and the remaining 17 provinces are expected to fall below 15%. Subsidy policies vary by province, with the main measures focusing on tax incentives and fiscal rewards.
The prefabricated building plans and subsidy policies of each province are summarized below for your quick reference!
Beijing
Policy
Implementation Opinions of the General Office of the Beijing Municipal People's Government on Accelerating the Development of Prefabricated Buildings
Target
By 2018, prefabricated buildings shall account for more than 20% of newly built floor area; by 2020, they shall account for more than 30% of newly built floor area.
Subsidy
1. For non-government investment projects outside the implementation scope that voluntarily adopt prefabricated buildings and meet the implementation standards, a floor area reward of no more than 3% of the project shall be granted;
2. Fiscal rewards shall be given to non-government investment projects within the implementation scope whose precast ratio reaches over 50% and whose prefabrication rate reaches over 70%;
3. Preferential policy of immediate refund of value-added tax upon collection;
4. Commercial housing development projects adopting prefabricated buildings may be exempt from construction progress requirements when applying for housing pre-sale permits.
Shanghai
Policy
Special Support Measures for Demonstration Projects of Building Energy Efficiency and Green Buildings in Shanghai
Target
1. The proportion of prefabricated building floor area secured within the total land supply of each district/county government and relevant administrative committee shall be no less than 50% in 2015; from 2016, all newly built civil buildings within the Outer Ring Road shall adopt prefabricated construction, and those outside the Outer Ring Road shall exceed 50%; from 2017, the proportion outside the Outer Ring Road shall increase year by year on the basis of 50%;
2. During the "13th Five-Year Plan" period, the per-building precast ratio of prefabricated buildings citywide shall reach over 40%, or the prefabrication rate over 60%. Newly built commercial housing, public rental housing and low-rent housing projects adopting prefabricated buildings within the Outer Ring Road shall be 100% fully fitted out.
Shanghai Prefabricated Building Development Plan 2016-2020
Subsidy
Projects meeting the monolithic prefabricated building demonstration criteria (residential prefabricated building floor area of over 30,000 m², public prefabricated building floor area of over 20,000 m²; building requirements: a per-building precast ratio of no less than 45% or a prefabrication rate of no less than 65%) receive a subsidy of RMB 100 per square meter.
Tianjin
Policy
Implementation Plan of the General Office of the Tianjin Municipal People's Government on Vigorously Developing Prefabricated Buildings
Target
1. By the end of 2017, government investment projects, affordable housing, and public buildings of 50,000 m² and above shall adopt prefabricated buildings; for newly built commercial housing with a floor area of 100,000 m² and above, the proportion adopting prefabricated buildings shall be no less than 30% of the total floor area;
2. From 2018 to 2020, all newly built public buildings that meet the conditions shall adopt prefabricated buildings, and commercial housing in the central urban area, the core area of Binhai New Area and the Sino-Singapore Eco-City shall all adopt prefabricated buildings; affordable housing and commercial housing using prefabricated buildings shall reach a full fit-out proportion of 100%;
3. From 2021 to 2025, all newly built projects on state-owned construction land citywide that meet the conditions shall adopt prefabricated buildings.
Subsidy
1. Newly built projects constructed using industrialized building methods that reach a certain prefabrication rate shall receive a full refund of the new-type wall material reform fund and the bulk materials fund, or a special fund reward;
2. Prefabricated building enterprises certified as high-tech enterprises shall pay corporate income tax at a reduced rate of 15%; R&D expenses incurred by prefabricated building enterprises in developing new technologies, new products and new processes may be deducted additionally when calculating taxable income;
3. Floor area rewards shall be implemented;
4. Preferential immediate refund of value-added tax upon collection.
Chongqing
Policy
Opinions on Accelerating the Modernization of the Building Industry
Target
1. By 2017, all newly started affordable housing citywide must adopt prefabricated construction technology; pilot projects for building industry modernization shall reach a prefabrication rate of over 15%;
2. By 2020, the prefabrication rate of newly started buildings citywide shall reach over 20%;
3. By 2025, it shall reach over 30%.
Subsidy
1. Pilot building projects for building industry modernization receive a subsidy of RMB 350 per cubic meter of concrete components;
2. Enterprises producing prefabricated building components from energy-saving and environmentally friendly materials, and integrated warehousing, processing and distribution service enterprises for building industrialization components such as rebar processing and distribution, which meet the conditions of the Western Development tax incentive policy, shall pay corporate income tax at a reduced rate of 15% in accordance with the law.
Heilongjiang
Policy
Implementation Opinions of the General Office of the Heilongjiang Provincial People's Government on Promoting the Development of Prefabricated Buildings
Target
1. By the end of 2020, prefabricated buildings shall account for no less than 10% of newly built floor area provincewide; in pilot cities, they shall account for no less than 30% of newly built floor area;
2. By the end of 2025, the province strives for prefabricated buildings to account for 30% of newly built floor area.
Subsidy
1. Land support: land and resources departments at all levels provincewide shall give priority to land use for prefabricated building industries and demonstration projects;
2. Financial services: buyers using housing provident fund loans to purchase commercial housing in projects certified as prefabricated buildings may have their loan quota increased by up to 20%.
3. Investment attraction incentives, science and technology support, fiscal rewards and subsidies, tax incentives, and industry support.
Jilin
Policy
Implementation Opinions of the General Office of the Jilin Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. By 2020, establish 2-3 national-level prefabricated building industrial bases; the province's prefabricated building floor area shall be no less than 5 million m²; in Changchun and Jilin cities, prefabricated buildings shall account for over 20% of newly built floor area, and in other cities with districts, over 10%;
2. From 2021 to 2025, prefabricated buildings shall account for over 30% of newly built floor area provincewide.
Subsidy
Establish special funds; tax and fee incentives; prioritize land supply for prefabricated building industrial bases (parks) and prefabricated building project construction; and give priority to prefabricated buildings in award and excellence nominations.
Liaoning
Policy
Implementation Opinions of the General Office of the Liaoning Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. By the end of 2020, the province strives for prefabricated buildings to account for over 20% of newly built floor area, with Shenyang striving for over 35%, Dalian for over 25%, and other cities for over 10%;
2. By the end of 2025, the province strives for prefabricated buildings to account for over 35% of newly built floor area, with Shenyang striving for over 50%, Dalian for over 40%, and other cities for over 30%.
Subsidy
1. Fiscal subsidies;
2. Preferential immediate refund of value-added tax upon collection;
3. Prioritize land supply for prefabricated building component production bases (parks) and project construction;
4. Allow up to 5% of the total planned floor area to be excluded from the floor area ratio calculation of the transacted plot.
Hebei
Policy
Implementation Opinions of the General Office of the Hebei Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. Cultivate 4 provincial-level comprehensive pilot cities for housing industrialization modernization; by the end of 2016, the started floor area of housing industrialization modernization projects provincewide shall reach 2 million m², with a per-building prefabrication rate of over 30%;
2. By the end of 2020, more than 40% of newly built residential projects in comprehensive pilot cities shall be constructed using housing industrialization modernization methods, and other cities with districts shall reach over 20%.
Subsidy
1. Prioritize the allocation of construction land;
2. For newly started urban prefabricated commercial housing and rural residents' self-built prefabricated housing projects, the local government where the project is located shall provide subsidies;
3. A policy of 50% immediate refund of value-added tax upon collection.
Shanxi
Policy
Implementation Opinions of the General Office of the Shanxi Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. In 2017, prefabricated buildings in Taiyuan and Datong shall account for over 5% of newly built floor area, rising to over 15% in 2018;
2. By the end of 2020, prefabricated buildings in the province's 11 cities with districts shall account for over 15% of newly built floor area, with Taiyuan and Datong striving for over 25%;
3. By the end of 2025, prefabricated buildings shall account for over 30% of newly built floor area.
Subsidy
Corresponding tax incentives; priority allocation of construction land; and a green channel for the approval of prefabricated building projects.
Inner Mongolia
Policy
Implementation Opinions of the General Office of the Inner Mongolia Autonomous Regional People's Government on Vigorously Developing Prefabricated Buildings
Target
1. In 2020, newly started prefabricated buildings shall account for over 10% of that year's newly built floor area across the region; among them, government investment projects shall reach over 50%; Hohhot, Baotou and Chifeng shall reach over 15%; Hulunbuir, Hinggan League, Tongliao, Ordos, Bayannur and Wuhai shall reach over 10%; and Xilingol League, Ulanqab and Alxa League shall reach over 5%;
2. In 2025, the region strives for prefabricated buildings to account for over 30% of that year's newly built floor area; among them, government investment projects shall reach 70%, Hohhot and Baotou shall reach over 40%, and all other leagues and cities shall strive for over 30%.
Subsidy
1. Prioritize land supply for prefabricated building industrial bases and project construction;
2. Post-subsidy funds at a certain proportion;
3. Tax incentives; proactive credit support; differentiated floor area ratio calculation; and preferential reduction or exemption of expressway tolls for transporting oversized and over-width precast components.
Henan
Policy
Guiding Opinions of the Henan Provincial Department of Housing and Urban-Rural Development on Promoting the Modernization of the Building Industry
Target
1. By 2017, the per-building prefabrication ratio of prefabricated buildings provincewide shall reach over 15%;
2. By the end of 2020, prefabricated buildings (with a prefabrication rate of no less than 50%) shall account for 20% of newly built floor area provincewide, and government-invested or government-led projects shall reach 50%;
3. By the end of 2025, the province strives for prefabricated buildings to account for 40% of newly built floor area, with 100% of eligible government investment projects adopting prefabricated construction.
Subsidy
1. Prioritize the allocation of construction land;
2. Affordable housing projects awarded a two-star green building operation label shall receive a provincial fiscal reward of RMB 20/m²; one-star affordable housing green buildings reaching a scale of over 100,000 m² shall receive the maximum fixed subsidy, with priority recommendation to apply for national green building reward funds;
3. Preferential refund policies for the special fund for new-type wall materials;
4. Floor area ratio rewards.
Hubei
Policy
Implementation Opinions of the General Office of the Hubei Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. By 2020, prefabricated building floor area in Wuhan shall account for over 35% of newly built floor area; Xiangyang, Yichang and Jingmen shall reach over 20%; and other cities with districts, Enshi Prefecture, directly administered cities and Shennongjia Forestry District shall reach over 15%;
2. By 2025, prefabricated buildings shall account for over 30% of newly built floor area provincewide.
Subsidy
Incentive policies and measures including supporting fund subsidies, floor area ratio rewards, commercial housing pre-sale permits, and a reduced proportion of pre-sale fund supervision.
Hunan
Policy
Implementation Opinions of the General Office of the Hunan Provincial People's Government on Accelerating the Development of Prefabricated Buildings
Target
By 2020, prefabricated buildings in the central cities of the province's prefectures and cities shall account for over 30% of newly built buildings, among which the central urban areas of Changsha, Zhuzhou and Xiangtan shall reach over 50%.
Subsidy
1. Fiscal rewards and subsidies; inclusion in the green channel for project approval; tax and fee incentives; priority processing of commercial housing pre-sales; and optimized project bidding procedures;
2. Floor area ratio rewards: for real estate development projects that proactively adopt prefabricated construction with a prefabrication rate above 50%, upon approval by the relevant authorities, 3%-5% of the project's total floor area may be excluded from the floor area ratio calculation of the transacted plot.
Shandong
Policy
Implementation Opinions of the General Office of the Shandong Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. In 2017, prefabricated building floor area shall account for about 10% of newly built floor area;
2. By 2020, prefabricated buildings in Jinan and Qingdao shall account for over 30% of newly built buildings, while other cities with districts and counties (county-level cities) shall reach over 25% and 15% respectively;
3. By 2025, prefabricated buildings shall account for over 40% of newly built buildings provincewide.
Subsidy
1. Priority support shall be given to the development of the prefabricated building industry in the allocation of construction land;
2. Enjoy tax and fee incentives such as loan interest subsidies;
3. The floor area of prefabricated external walls (not exceeding 3% of the total planned floor area) may be excluded from the floor area ratio calculation of the transacted plot.
Jiangsu
Policy
Opinions of Jiangsu Province on Accelerating the Modernization of the Building Industry and Promoting the Transformation and Upgrading of the Construction Industry
Target
1. By 2020, prefabricated buildings shall account for over 30% of newly built buildings provincewide.
2. By 2025, prefabricated buildings shall account for over 50% of newly built buildings provincewide, and the prefabrication rate of decoration and fit-out shall reach over 60%.
Subsidy
Fiscal support policies; corresponding tax incentives; priority allocation of land use quotas; and floor area ratio rewards.
Anhui
Policy
Notice of the General Office of the Anhui Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. By 2020, prefabricated buildings shall account for 15% of newly built floor area;
2. By 2025, strive for prefabricated buildings to account for 30% of newly built floor area.
Subsidy
Enterprise support policies; special funds; preferential calculation policies for construction work-injury insurance premiums; differentiated land policies and land plan guarantees; interest rate preferences, etc.
Zhejiang
Policy
Implementation Opinions of the General Office of the Zhejiang Provincial People's Government on Promoting the Development of Green Buildings and Building Industrialization
Target
By 2020, prefabricated buildings in Zhejiang Province shall account for 30% of newly built buildings, with a per-building prefabrication rate of over 30%.
Subsidy
1. Allocate special land use quotas;
2. Rural housing whole-village or contiguous renovation and construction projects that meet prefabricated building requirements shall receive a fund subsidy of no more than 10% of the main construction cost;
3. Buyers using housing provident fund loans to purchase commercial housing built with prefabricated construction may have their loan quota increased by up to 20%;
4. For prefabricated building projects, the quality guarantee deposit paid by the construction enterprise shall be calculated at a 2% rate based on the total contract price minus the total price of precast components; the residential property warranty fund paid by the project owner shall be calculated at a 2% rate based on the total property construction and installation cost minus the total price of precast components;
5. Floor area ratio rewards.
Jiangxi
Policy
Guiding Opinions of the Jiangxi Provincial People's Government on Promoting the Development of Prefabricated Buildings
Target
1. In 2018, buildings using prefabricated construction shall account for 10% of newly built buildings in the same period provincewide, among which government investment projects shall reach 30%.
2. In 2020, buildings using prefabricated construction shall account for 30% of newly built buildings in the same period provincewide, among which government investment projects shall reach 50%.
3. By the end of 2025, the province strives for buildings using prefabricated construction to account for 50% of newly built buildings in the same period, with all eligible government investment projects adopting prefabricated construction.
Subsidy
1. Prioritize land use for prefabricated building industries and demonstration projects;
2. A key industry for investment attraction;
3. Differentiated floor area ratio calculation;
4. Tax incentives;
5. Fund subsidies and rewards;
Fujian
Policy
Implementation Opinions of the General Office of the Fujian Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. By 2020, prefabricated buildings shall account for over 20% of newly built floor area provincewide;
2. By 2025, prefabricated buildings shall account for over 35% of newly built floor area provincewide.
Subsidy
Land supply guarantees; floor area ratio rewards; financial incentives for homebuyers; tax and fee incentives, etc.
Guangdong
Policy
Implementation Opinions of the General Office of the Guangdong Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. In the Pearl River Delta city cluster, by the end of 2020, prefabricated buildings shall account for over 15% of newly built floor area, with government investment projects reaching over 50%; by the end of 2025, they shall account for over 35%, with government investment projects reaching over 70%;
2. In the central urban areas of prefecture-level cities in eastern, western and northern Guangdong with a permanent population of over 3 million, by the end of 2020, prefabricated buildings shall account for over 15% of newly built floor area, with government investment projects reaching over 30%; by the end of 2025, they shall account for over 30%, with government investment projects reaching over 50%;
3. In other areas of the province, by the end of 2020, prefabricated buildings shall account for over 10% of newly built floor area, with government investment projects reaching over 30%; by the end of 2025, they shall account for over 20%, with government investment projects reaching over 50%.
Subsidy
Priority allocation of land plan quotas; preferential immediate refund of value-added tax upon collection; appropriate fund subsidies; and priority credit support.
Guangxi
Policy
Guiding Opinions on Vigorously Promoting Prefabricated Buildings to Advance the Modernization of the Building Industry in the Region
Target
1. By the end of 2018, prefabricated buildings in comprehensive pilot cities shall account for over 8% of newly built buildings, and newly built affordable housing projects and government-invested public works in urban built-up areas shall adopt prefabricated construction at a proportion of over 10%;
2. By the end of 2020, prefabricated buildings in comprehensive pilot cities shall account for over 20% of newly built buildings, newly built affordable housing projects and government-invested public works in urban built-up areas shall adopt prefabricated construction at over 20%, and the floor area proportion of newly built fully fitted-out housing shall reach over 20%; in other cities with districts, prefabricated buildings shall account for over 5% of newly built buildings, newly built affordable housing projects and government-invested public works shall adopt prefabricated construction at over 10%, and the floor area proportion of newly built fully fitted-out housing shall reach over 10%;
3. By the end of 2025, the region strives for prefabricated buildings to account for 30% of newly built buildings.
Subsidy
Priority allocation of construction land; corresponding reduction and exemption policies; and a green channel for approval procedures.
Hainan
Policy
Guiding Opinions of Hainan Province on Promoting the Modernization of the Building Industry
Target
By 2020, newly built floor area constructed using building industry modernization methods shall account for 10% of the newly started floor area in the same period provincewide; the precast ratio of newly started per-building construction provincewide (the proportion of precast components in structures such as walls, beams and columns, floor slabs, stairs and balconies) shall be no less than 20%; and the supply proportion of fully fitted-out housing in newly built residential projects provincewide shall reach over 25%.
Subsidy
Priority allocation of land use quotas; allocation of special funds for scientific research; relevant tax and fee incentives; and administrative licensing support, etc.
Shaanxi
Policy
Implementation Opinions of the General Office of the Shaanxi Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
The proportion of prefabricated buildings among newly built buildings shall reach over 20% in key promotion regions by 2020 and over 30% provincewide by 2025.
Subsidy
1. Financial support, subsidies and rewards;
2. Prioritize land supply for prefabricated building projects and industries;
3. Prefabricated building component manufacturing enterprises that meet the criteria for high-tech enterprises shall apply a corporate income tax rate of 15%;
4. Immediate refund of value-added tax upon collection.
Gansu
Policy
Implementation Opinions of the General Office of the Gansu Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. By 2020, preliminarily establish prefabricated building industrial bases with a rational industrial layout across the province;
2. By 2025, basically form relatively complete systems of technical standards, science and technology support, industrial supporting facilities, supervision and management, and market promotion. Strive for prefabricated buildings to account for over 30% of newly built floor area.
Subsidy
1. For buildings constructed using prefabricated methods, the floor area of prefabricated external walls may be excluded from the floor area calculation, but shall not exceed 3% of the total floor area;
2. Priority support in awards, excellence and advanced nominations;
3. Financial support through methods such as build-first-then-subsidize and using rewards in place of subsidies;
4. Exemption from value-added tax.
Ningxia
Policy
Implementation Opinions of the General Office of the Ningxia Autonomous Regional People's Government on Vigorously Developing Prefabricated Buildings
Target
1. From 2017, public-welfare building projects such as schools, hospitals and elderly care facilities invested by governments at all levels with a total floor area of over 3,000 m², as well as public buildings such as airports, stations and government office buildings with a per-building floor area of over 10,000 m² and affordable housing projects, shall be given priority for prefabricated construction;
2. By 2020, prefabricated buildings shall account for 10% of newly built buildings in the same period;
3. By 2025, prefabricated buildings shall account for 25% of newly built buildings in the same period across the region.
Subsidy
1. Implement support policies such as interest subsidies to strengthen the leveraging role of funds;
2. For construction projects supplied with land through bidding, auction or listing, prefabricated building floor area shall be guaranteed at no less than 20% of the total land supply area of the project; for public-welfare buildings, public buildings and affordable housing projects supplied with land through allocation and invested by the government, prefabricated building floor area shall be guaranteed at no less than 30% of the total land supply area of the project;
3. Increase credit support; preferential immediate refund of value-added tax upon collection.
Qinghai
Policy
Implementation Opinions of the General Office of the Qinghai Provincial People's Government on Promoting the Development of Prefabricated Buildings
Target
By 2020, prefabricated buildings shall account for over 10% of newly built buildings in the same period provincewide; Xining and Haidong shall reach over 15%; and other areas shall reach over 5%.
Subsidy
Priority land supply guarantees; prefabricated building component manufacturing enterprises that meet the criteria for high-tech enterprises shall enjoy the preferential corporate income tax rate of 15%; and green building support policies shall apply.
Xinjiang
Policy
Implementation Opinions of the Xinjiang Uygur Autonomous Region on Vigorously Developing Prefabricated Buildings in the Region
Target
1. By 2020, the proportion of prefabricated buildings in newly built floor area shall reach over 15% in active promotion regions and over 10% in encouraged promotion regions;
2. By 2025, prefabricated buildings shall account for 30% of newly built floor area across the region.
Subsidy
1. Fiscal reward policies. Cities that meet the conditions shall establish special fiscal funds to reward newly built prefabricated buildings and support the development of prefabricated buildings;
2. Tax and fee incentive policies. Component manufacturing enterprises that comply with the Catalogue of Value-Added Tax Preferences for Products and Services of Comprehensive Resource Utilization may enjoy the preferential immediate refund of value-added tax upon collection in accordance with regulations;
3. Financial support policies. Financial institutions shall actively open a green channel for eligible enterprises engaged in building prefabricated building parks, bases and projects and in technological R&D;
4. Land support policies and science and technology support policies;
5. Planning support policies, granting prefabricated building projects a floor area ratio reward of no more than 3%;
6. Award and excellence policies. Add prefabricated building indicator requirements to work such as the selection of the Human Settlements Environment Award, the evaluation of ecological garden cities, and green building assessment; give priority to prefabricated buildings when selecting quality projects and outstanding engineering designs and when assessing civilized construction sites.
Sichuan
Policy
Implementation Opinions of the General Office of the Sichuan Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
1. By 2020, prefabricated buildings shall account for 30% of newly built buildings provincewide with a prefabrication rate of over 30%, among which the five pilot cities shall have prefabricated buildings accounting for over 35% of newly built buildings; newly built residential full fit-out shall reach 50%;
2. By 2025, buildings with a prefabrication rate of over 50% shall account for 40% of newly built buildings; in the construction of bridges, railways, roads, utility tunnels, tunnels and municipal works, all shall adopt prefabricated construction except where cast-in-situ is required. Newly built residential full fit-out shall reach 70%.
Subsidy
1. Land support. Prioritize land use for building industry modernization bases and demonstration projects, give priority in allocating land use quotas to projects included in the annual major project investment plan, and strengthen land use guarantees for building industry modernization projects;
2. Tax incentives. Enterprises producing with modern methods that are certified as high-tech enterprises upon application shall pay corporate income tax at a reduced rate of 15%;
3. Floor area ratio rewards: when processing planning approvals, the floor area of prefabricated external walls (not exceeding 3% of the total planned floor area) may be excluded from the floor area ratio calculation of the transacted plot;
4. Preferential award and excellence policies. Projects with a prefabrication rate of over 30% shall enjoy green building policy subsidies and be given priority in project award and excellence selections;
5. Science and technology innovation support policies, financial support, pre-sale fund supervision, bidding policies, and fund support.
Guizhou
Policy
Implementation Opinions Issued by the General Office of the Guizhou Provincial Government on Vigorously Developing Prefabricated Buildings
Target
1. From October 1, 2018, for newly built projects with an above-ground construction scale of over 100,000 m² obtained through bidding or auction, no less than 30% of the construction scale shall actively adopt prefabricated construction;
2. By the end of 2020, the floor area of projects using prefabricated construction provincewide shall be no less than 5 million m², prefabricated buildings shall account for over 10% of newly built floor area, over 15% in active promotion regions, and over 10% in encouraged promotion regions;
3. By the end of 2023, prefabricated buildings shall account for over 20% of newly built floor area provincewide, over 25% in active promotion regions, and over 15% in encouraged promotion regions, and a standard system covering the whole process of prefabricated building design, production, construction, supervision and acceptance shall be basically formed;
4. Strive for prefabricated buildings to account for 30% of newly built floor area provincewide by the end of 2025.
Subsidy
Financial support; broadened financing channels; priority land use support for prefabricated building enterprises, bases and projects; preferential immediate refund of value-added tax upon collection; installment payment of land transfer fees; and floor area rewards, etc.
Yunnan
Policy
Implementation Opinions of the General Office of the Yunnan Provincial People's Government on Vigorously Developing Prefabricated Buildings
Target
By 2020, prefabricated buildings in Kunming, Qujing and Honghe Prefecture shall account for 20% of newly built floor area, and every other prefecture and city shall have at least 3 demonstration projects; by 2025, the province strives for prefabricated buildings to account for 30% of newly built floor area, with Kunming, Qujing and Honghe Prefecture reaching 40%.
Subsidy
Enjoy value-added tax refunds (exemptions); open a green channel and provide diversified financial services; and guarantee the land use needs of project construction.
Tibet
Policy
Implementation Opinions of the General Office of the Tibet Autonomous Regional People's Government on Promoting the Development of Plateau Prefabricated Buildings
Target
Before 2020, relevant project approval departments shall select a certain number of typical projects that can be referenced and replicated as government-promoted demonstration projects; during the "14th Five-Year Plan" period, relevant project approval departments shall ensure that prefabricated buildings account for no less than 30% of newly built floor area in the same period among national investment projects.
Subsidy
Increase fiscal support; strengthen land guarantees; implement investment attraction policies; implement tax and fee incentive policies; strengthen financial services; and increase industry support.
[Copyright statement: This article is excerpted from "Pinzhai Decoration Technology"]
END
The views expressed are the author's own Copyright © Zhuwei Architectural Technology
Reproduction without authorization is prohibited
Please credit the source when reposting: Zhuwei Architectural Technology
Zhuwei Architectural Technology is a new-type technical services company specializing in integrated design optimization, BIM consulting and prefabricated construction design consulting. Our team brings together senior engineers from leading design institutes, former executives of real-estate companies, BIM engineers and prefabrication engineers, delivering integrated design optimization, refined drawing review, BIM consulting with MEP detailing, and prefabricated design services.
Design optimization consulting: Positioned as an extension and complement to the design management of real-estate developers, we focus on consulting and optimization for civil buildings. Across the whole process — or at key stages required by the client — we control the economy, rationality and safety of the design, eliminating unnecessary cost while measurably improving drawing quality, achieving "lower cost, higher efficiency".
BIM consulting: Through digital construction technology we help designers reduce errors and improve quality in the design phase, help contractors save cost and plan high-quality MEP installation in the construction phase, and extend BIM models into facility management for the operation phase — in collaboration with mainstream software vendors.
Prefabricated design consulting: Whole-process design on BIM platforms, using Revit and Tekla for PC detailing. Component geometry and reinforcement are linked parametrically — what you see is what you get. We deliver Industry 4.0-ready drawings with cut-length data for every rebar, and IoT-enabled support for production, storage, transport and installation of PC components.
Our expert team comes from leading design institutes, with deep technical grounding and extensive experience in dual-track design and optimization; its technical capability and control are industry-leading.
—— This article is auto-synced from the WeChat Official Account “Zhuwei Architectural Technology”. Read the original ——