Provincial Housing and Urban-Rural Development Department | BIM+ and Other Smart Construction Technologies Included! "Shanxi Province's 10 New Construction Technologies (2024 Edition)" Released! This Account Exclusively Publishes the Supporting Solutions!

The following article is sourced from the Shanxi Provincial Department of Housing and Urban-Rural Development; author: Laoshuai BIM

          

Housing & Construction News  

Recently, the Shanxi Provincial Department of Housing and Urban-Rural Development issued the Notice on Promoting the Application of the Ten New Technologies for the Construction Industry in Shanxi Province (2024 Edition) (Jin Jian Zhi Zi [2024] No. 192), summarizing ten new technologies across the following ten areas:

•Foundation and Underground Space Engineering Technologies

•Reinforcement and Concrete Technologies

•Formwork and Scaffolding Technologies

•Prefabricated Concrete Structure Technologies

•Steel Structure Technologies

•Mechanical and Electrical Installation Engineering Technologies

•Envelope Energy Efficiency and Green Construction Technologies

•Waterproofing and Building Decoration Engineering Technologies

•Seismic Resistance, Reinforcement and Monitoring Technologies    

•Smart Construction Technologies

Among these, the smart construction technologies include:BIM-based on-site construction information management technology, BIM-based digital construction technology for prefabricated machine rooms, BIM-based lightweight digital platform application technology, BIM + panorama-based model-reality consistency acceptance technology, AR-based quality acceptance technology, big-data-based project cost analysis and control information technology, cloud-computing-based e-commerce procurement technology, IoT-based full-process material supervision technology for engineering general contracting projects, 3D laser scanning application technology, oblique photography technology, layout robot application technology, high-precision floor laser leveling integrated construction technology, digital intelligent paving technology for asphalt concrete pavements, and mechanical spraying and plastering application technology.

Previously, the Notice on Organizing the Certification of New Technology Application Demonstration Projects in Shanxi Province (Jin Jian Zhi Han [2024] No. 1072) and the Notice on Declaring the 2025 Project Approvals for New Technology Application Demonstration Projects in Shanxi Province (Jin Jian Zhi Han [2024] No. 1073) were issued, setting out the relevant requirements for organizing the certification of new technology application demonstration projects in Shanxi Province, and stating that BIM-based on-site construction information management technology is a mandatory option.    

         
   

              

Notice on Promoting the Application of the Ten New Technologies for the Construction Industry in Shanxi Province (2024 Edition)

Source: Division of Engineering Quality and Safety Supervision, Shanxi Provincial Department of Housing and Urban-Rural Development

Jin Jian Zhi Zi [2024] No. 192

To the housing and urban-rural development bureaus of all cities, all relevant construction enterprises and all relevant units:

In order to lead industry development and the revolution in construction technology, accelerate the industrialization, digitalization and green transformation and upgrading of the construction industry, and promote the improvement of construction quality and the high-quality development of the construction industry in our province, our department has organized the compilation of the Ten New Technologies for the Construction Industry in Shanxi Province (2024 Edition), which is hereby printed and distributed to you. Please do a good job in its promotion and application, comprehensively strengthen the quality management of construction projects, and continuously improve the level of construction technology.

Attachment (click to download):Ten New Technologies for the Construction Industry in Shanxi Province (2024 Edition).pdf

Shanxi Provincial Department of Housing and Urban-Rural Development

October 20, 2024

(Proactively disclosed) 

          

The document gives special mention to smart construction technologies; this article highlights the corresponding solutions for smart construction technologies (in part):

BIM-based Digital Construction Technology for Prefabricated Machine Rooms ☆ ☆ ☆ ☆ ☆       

BIM-based Lightweight Digital Platform Application Technology ☆ ☆ ☆ ☆ ☆    

BIM + Panorama-based Model-Reality Consistency Acceptance Technology ☆ ☆ ☆ ☆ ☆

AR-based Quality Acceptance Technology ☆ ☆ ☆ ☆ ☆

3D Laser Scanning Application Technology ☆ ☆ ☆ ☆ ☆

Based on 3D scanning and point-cloud model processing, applications such as actual measurement, deformation monitoring, deviation detection, model comparison, site reconstruction, topographic surveying, cultural relic restoration, machine room reconstruction, concealed-work archiving, renovation of old projects and construction of irregular components can be completed during the design, construction and renovation of building engineering projects. This enables the collection of authentic, high-precision data sources, on the basis of which building engineering design and construction become more comprehensive and accurate, and the design model is combined with the 3D scene, thereby arriving at the optimal design solution.    

   

 

   

   

   

   

Layout Robot Application Technology ☆ ☆ ☆ ☆ ☆    

   

High-Precision Floor Laser Leveling Integrated Construction Technology ☆ ☆ ☆ ☆ ☆    

   

   

Mechanical Spraying and Plastering Application Technology ☆ ☆ ☆ ☆ ☆    

  

          

END

The views expressed are the author's own  Copyright © Zhuwei Architectural Technology

Reproduction without authorization is prohibited

Please credit the source when reposting: Zhuwei Architectural Technology

      Zhuwei Architectural Technology is a new-type technical services company specializing in integrated design optimization, BIM consulting and prefabricated construction design consulting. Our team brings together senior engineers from leading design institutes, former executives of real-estate companies, BIM engineers and prefabrication engineers, delivering integrated design optimization, refined drawing review, BIM consulting with MEP detailing, and prefabricated design services.

      Design optimization consulting: Positioned as an extension and complement to the design management of real-estate developers, we focus on consulting and optimization for civil buildings. Across the whole process — or at key stages required by the client — we control the economy, rationality and safety of the design, eliminating unnecessary cost while measurably improving drawing quality, achieving "lower cost, higher efficiency".

      BIM consulting: Through digital construction technology we help designers reduce errors and improve quality in the design phase, help contractors save cost and plan high-quality MEP installation in the construction phase, and extend BIM models into facility management for the operation phase — in collaboration with mainstream software vendors.

      Prefabricated design consulting: Whole-process design on BIM platforms, using Revit and Tekla for PC detailing. Component geometry and reinforcement are linked parametrically — what you see is what you get. We deliver Industry 4.0-ready drawings with cut-length data for every rebar, and IoT-enabled support for production, storage, transport and installation of PC components.

      Our expert team comes from leading design institutes, with deep technical grounding and extensive experience in dual-track design and optimization; its technical capability and control are industry-leading.

—— This article is auto-synced from the WeChat Official Account “Zhuwei Architectural Technology”. Read the original ——